When all the moss has visibly turned brown, it is dead and can be removed. This may take a month or more after applying the moss remover. Go up to the roof and start removing the moss, working from the bottom up. The best tools are a soft-bristled, long-handled scrub brush and a 5-in-1 spatula or painter's tool.
Use these tools to gently lift the moss mats and remove them with a brush. At the seams, use the sharp edge of the scraper like a dental pick to push out the moss. Now that you know how to remove mold from roof tiles, it's critical to prevent them from growing again. So don't be tempted to use a pressure washer or a jet of pressurized water on the ceiling when you remove the moss.
They are still effective in killing plants and fungi that grow on the roof without the risk of damaging the roof. Distribute the moss remover in uninterrupted horizontal lines 2 to 4 feet apart, parallel to the roof ridge. If you decide to remove moss or mold from roof tiles yourself, you should prioritize your safety. While the application may be easier than with dry powders, you'll need to mount the roof later to remove dead moss.
A thick growth of moss works like a sponge, keeps the roof moist for long periods of time, and can lift the edges of shingles, making them vulnerable to falling off in a windstorm. However, dry moss removers can be difficult to dispense evenly and can leave white stripes that sometimes remain on the ceiling until several heavy showers wash them away. Dead moss must still be removed by hand, or it will prevent water flow from the roof and create problems. While you may not necessarily have to remove moss-covered shingles before installing a new roof, you should consider this.
So how do you safely remove moss from a roof? If you are planning to replace the roof, do you need to remove the moss first? And how do you prevent moss from growing back after you've removed it? We'll answer those questions and tell you other things you need to know about how to handle the moss on your tile roof. Newer asphalt, fiberglass, or slate shingles may have a chemical coating resistant to moss, but older tile roofs are often invaded by moss or other growths. When you get a roof replacement, you may want your roofers to install the new roof over the old one. After leaving the chemicals for a while, use a long-handled, soft-bristled brush to remove the moss manually.
Prevent a moss problem from recurring by installing strips of zinc- or copper-coated sheet metal just below the upper ridge on both sides of the roof. When it rains, the moss absorbs water and retains it, creating conditions of constant humidity on the roof.
